OAE Data Transfer from GSI Corti or EroScan

Transferring OAEs from GSI Corti or EroScan

1. Begin by determining what COM port the device is currently using.

   1. This will not change between tests but may change if the device has been unplugged recently. If you already know what port is being used you may skip to step 2.

   2. Right click the Start button in the bottom left corner of the Windows desktop.

      

   3. Select Device Manager, and a new window will open showing devices connected to the PC.

      

   4. Select the arrow (>) to expand the section Ports (COM & LPT).

   5. The Corti or EroScan will likely be displayed as USB Serial Port (COM#). Take note of this number. In this example it is COM 4.

   6. If you are unsure which device or port the device is connected to, you may disconnect and reconnect the device where it is plugged into the workstation and note which device disappears and reappears in the device manager.

2. In the AudBase OAE tab, select the Corti or EroScan button from the instrument module palette.

   

3. Select the COM Port you noted earlier for the device, and select OK.

   

   ---

   For further assistance, please call the AudSoft Helpdesk at 1-888-959-6790, or start a ticket by emailing a description of your problem to: support@audbase.com